Shure BLX4R Specifications Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
14
Specifications
BLX1
Audio Input Level
gain position max
-16 dBV maximum
min (0 dB)
+10 dBV maximum
Gain Adjustment Range
26 dB
Input Impedance
1 MΩ
RF Transmitter Output
10 mW, typical
varies by region
Dimensions
110 mm X 64 mm X 21 mm H x W x D
Weight
75 g (2.6 oz.), without batteries
Housing
Molded ABS
Power Requirements
2 LR6 AA batteries, 1.5 V, alkaline
Battery Life
up to 14 hours (alkaline)
BLX2
Audio Input Level
gain position 0dB
-20 dBV maximum
-10dB
-10 dBV maximum
Gain Adjustment Range
10 dB
RF Transmitter Output
10 mW, typical
varies by region
Dimensions
224 mm X 53 mm L x Dia.
Weight
218 g (7.7 oz.) (without batteries)
Housing
Molded ABS
Power Requirements
2 LR6 AA batteries, 1.5 V, alkaline
Battery Life
up to 14 hours (alkaline)
BLX4R
Output Impedance
XLR connector
200 Ω
6.35 mm (1/4") connec-
tor
50 Ω
Audio Output Level
Ref. ±33 kHz deviation with 1 kHz tone
XLR connector
–20.5 dBV (into 100 kΩ load)
6.35 mm (1/4") connec-
tor
–13 dBV (into 100 kΩ load)
RF Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
>50 dB, typical
Dimensions
50 mm X 198 mm X 163 mm H x W x D
Weight
without antennas
998 g (2.2 lb.)
Housing
Molded ABS, steel
Power Requirements
12–15 V DC @ 260 mA, supplied by external power supply (tip positive)
System
Working Range
91 m (300 ft) Line of Sight
Note: Actual range depends on RF signal absorption, reflection and interference.
Audio Frequency Response
50 to 15,000 Hz
Note: Dependent on microphone type
Total Harmonic Distortion
Ref. ±33 kHz deviation with 1 kHz tone
0.5%, typical
Dynamic Range
100 dB, A-weighted, typical
Operating Temperature
-18°C (0°F) to 57°C (135°F)
Note: Battery characteristics may limit this range.
Polarity
Positive pressure on microphone diaphragm (or positive voltage ap-
plied to tip of WA302 phone plug) produces positive voltage on pin 2
(with respect to pin 3 of low-impedance output) and the tip of the high
impedance 1/4-inch output.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments