Shure 54 Manual

Models BETA 53 ™ and BETA 54 ™Wired Micophones©2010 Shure Incorporated 27A14144 (Rev. 2) Printed in U.S.A.BETA 53BETA 54Headworn Vocal MicrophonesMicr

73Wiring DiagramMicrophone Cartridge5Case (ground)4Shield (ground)3Red1 (+5Vdc)Black (audio out)2Wireless Test Circuit6+5Vdc100k20k1.0 uf123412342SK11

74BETA 53 BETA 5420 200001000 1000050 10098765432 98765432+100–10HzdB–20+20Standard Protective CapFiltered Protective Cap20 200001000 1000050 10098765

75CERTIFICATION Eligible to bear CE Marking. Conforms to European EMC Directive 2004/108/EC. Meets Harmonized Standards EN55103-1:1996 and EN55103-2:1

认证 允许使用CE标志。符合欧盟EMC法规2004/108/EC。符合Harmonized标准EN55103-1：1996和EN55103-2：1996适用于民用(E1)和轻工业(E2)环境。可从以下地址获得“符合性声明：欧洲授权代表：Shure Europe GmbH

Patent Notice: Patent Des. 451,902www.shure.com ©2010 Shure IncorporatedEurope, Middle East, Africa:Shure Europe GmbHWannenäckestr. 28,74078 Heilbronn

1IntroductionShure models BETA 53 and BETA 54 are subminiature, electret condenser headworn microphones. They provide uncompromised sound quality and

2Beta 53 Models• Omnidirectional• For broadcast and stage• Black finish• Detachable in-line preamp for wired applications• Requires phantom power

3Adjusting the Headband and Microphone① Adjust headband width② Adjust boom height③ Adjust boom length④ Do not attempt to bend the microphone boom!⑤ “R

4Using the Windscreens and Protective Caps WindscreenGrip the internal frame of the windscreen firmly when connecting or removing. Do not pull on the

5Positioning the MicrophoneBETA 53• Position the omnidirectional BETA 53 microphone near the corner of the mouth• If necessary, roll the boom to avo

6Wearing the Microphone on Either SideThe microphone boom may be reinstalled to position it on the left or right side of the head.• Carefullydetach

7Component Black Tan① Foam Windscreen (5 pieces) RPM304 RPM306② Standard Protective Cap (gold mesh) (5 pieces) RPM208 RPM212Filtered Protective Cap* (

8BETA 54 Replacement Parts and AccessoriesComponent Black Tan① Microphone/Boom Assembly with TA4F Connector (1 piece) RPM646 RPM648② Standard Protecti