Shure SE846 User Manual download pdf (Page 4)

4

Removing the Earphones

Grasp the body of earphone

and gently twist to remove.

Note: Do not pull on cable to

remove earphone.

Detachable Cable

You may need to detach the

cable from the earphones to at-

tach optional components or to

replace the cable if it becomes

damaged. To prevent acciden-

tal separation, the connector

has a snug fit. Take special

care to prevent damage to the

earphone and connector.

• Do not use pliers or other

tools.

• Grasp the connector and

the earphone as close as

possible to where they join.

• Pull straight apart—do not

twist. Cable is a snap fit,

not threaded.

Note: If you pull at an

angle, the connector will

not detach.

• Do not pull on the cable

or put any pressure on the

earphone nozzle.

• Listen for a click when

connecting.

• When reattaching the

cable, match the "L" and

"R" markings. For clear

cables and earphones,

match the color dots

(Red=Right, Blue=Left).

Maintenance and Cleaning

Careful maintenance ensures a tight seal be-

tween the sleeve and nozzle, improving sound

quality and product safety.

• Keep the earphones and sleeves as clean

and dry as possible.

• To clean sleeves, remove them from

earphones, gently rinse in warm water and

air dry. Foam sleeves require a longer drying

time. Inspect for damage and replace if

necessary. Ear sleeves must be completely

dry before reusing.

• Wipe the earphones and sleeves with mild

antiseptic to avoid infections. Do not use

alcohol-based disinfectants.

• Do not expose earphones to extreme

temperatures.

• Replace sleeves if they do not fit properly.

• Do not attempt to modify this product. Doing

so will void the warranty and could result in

personal injury and/or product failure.

Cleaning the Nozzle

If you notice a change in sound quality, remove

the sleeve and check the nozzle of your ear-

phone. If nozzle is blocked, clear obstructions.

If no obstruction is found or if sound quality

does not improve, replace the sleeve with a new

sleeve or disassemble the nozzle to clean inside.

Caution: When cleaning, do not force any object

through the earphone nozzle! This will damage

the earphone sound filter.

1 2 3 4 5 6 7 8 9 ... 31 32

Comments to this Manuals

No comments