Shure LX4 User's Guide download pdf (Page 11)

Wireless

RECEIVER CONNECTIONS (FIGURE 8)

1. Attach the supplied quarter-wave antenna(s) to the antenna connector(s) on the receiv-

er back panel. For best performance, the LX4 receiver antennas should be oriented

with the tips pointing away from each other at a 45° angle from vertical. The LX3 receiv-

er antenna should be vertical.

2. Connect the receiver output to the mixer or amplifier input, using a standard audio

cable with a female 3-pin XLR connector or

-inch phone plug.

3. Connect the ac adapter to the POWER jack on the rear panel of the receiver.

4. Plug the ac adapter into an appropriate ac power source.

LX4

45°

LX4

WIRELES

RECEIVER

AUDIO

SQUELCH

LEVEL POWER

342 56

ANT

OUTPUT

HI Z POWER

12.5 – 18.9 VDC

LX3

AUDIO MIXER

RECEIVER CONNECTIONS

FIGURE 8

NOTE: If the receiver is rack-mounted, the antenna(s) must extend above the rack cabinet

or be remotely located.

Improved LX4 diversity performance may be obtained by installing one or both anten-

na(s) at a remote location and separating them by 1.5 meters (60 inches) or more.

Shure WA380 telescoping or WA490 cable-type

-wave antennas are recommended

for remote location, and they should be connected to the receiver via WA421 Extension

Cable Kit(s) or other suitable low-loss cable.

1 ... 10 11 12 ... 26

No comments

Shure LX4 User's Guide Page 11