12
SHURE
®
utilit~
microphones
FOR CONTROL ROOMS, CUING, TALKBACK, INTERCOM, AND
NEWSROOM APPLICATIONS
IN
WHICH THE MICROPHONE
IS
PERMANENTLY MOUNTED,
A complete selection of general purpose microphones for mounting
on goosenecks
or
other flexible
or
fixed mountings. Recommended
for use in
control rooms, cuing. talkback. intercom. newsroom, and
other
applications where a han
ds-f
ree, permanentl
y.
or
semi-perma-
nently located microphone is called for. Models 545L and
561
avail-
able
as
head alone. while Models 515SB-G18 and 572G are complete
with gooseneck and mounting flange. (Goosenecks available with
side
cable opening on special request.)
MINIATURE - MODEL 572G
Omnidirectional dynamic head with same performance characteristics
as
19.1
mm
(%
")
diameter Model
571
miniature dynamic
microphone
(page 13). The head is about the same diameter
as
the gooseneck
itself, creating a strikingly trim appearance. With special, slim. and
quiet
, flexible
12-inch
gooseneck. and mounting flange. With
non-
detachable. five-foot, two-conductor shielded cable. Low impedance:
matches any input from
25
to 250 ohms.
UNIDIRECTIONAL - MODEL 545L
Superb cardioid
pickup
and excellent voice respon
se
for
on-the-air
and production use. or wherever suppression of background noise
is
desired. such
as
in
news rooms. control rooms. and other noisy loca-
tions. Low frequency response characteristics minimize boominess.
Designed
primarily for lavalier use (with lavalier cord included), but
can
also be mounted on a flexible gooseneck. Low impedance:
matches any input from 25 to
200 ohms. With attached 20-foot. two-
conductor
sh
ielded cable. Thread is
Sfs"
- 27 to fit conventional goose-
necks.
UNIDIRECTIONAL - MODEL 515SB-G18
Versatile. economical unidirectional microphone for virtually any fixed-
mount
installation. True cardioid pickup characteristic
s.
symmetrical
about axis for ambient noise suppression. Frequency response from
80 to 13.000
Hz.
Shock-mounted cartridge to cut mechanical and
vibration noise.
Permanently attached 475
mm
(18")
gooseneck.
Grip-
to-talk switch controls both microphone circuit and a relay or control
circuit. Low impedance: matches any input from 25 to 200 ohms. With
1.3 m
(51
")
four-conductor
cable, (two conductors under shield).
STANDARD - MODEL
561
Rugged. low-cost. omnidirectional dynamic microphone for perma-
nent mounting.
"Tamper-proof"
head with set-screw provision for
locking head to gooseneck or fitting. 40 to 10.000
Hz
with rising
response characteristic for crisp.
intelligible speech. Low impedance:
matches any input from
50 to 200 ohms.
-56
dB
output.
5/
S
"
- 27
thread connected to standard goosenec
ks
or other flexible or fixed
mountings. Head measures 64.5 mm x 34.9
mm
diam.
(2?{6"
x
1%").
With four-foot.
two-conductor
shielded cable.
UNIDIRECTIONAL - MODELS 515SBG and 515BG
Model 515SBG is identical to Model 515SB-G18 above. except that
gooseneck is not
include
d.
Model 515BG is identical to Model 515SB-
G 18 also. except gooseneck and switch are not included. and cable
is
two-conductor
shielded. Both models have standard
Sfs
" - 27 thread
to
fit conventional goosenecks.
(20 pages)
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals