Shure UA845 User's Guide download pdf (Page 11)

11 ENGLISH

CONNECTING RECEIVERS

SINGLE UA845 SETUP

Using low-loss, 50

W coaxial cables (RG-58 or equivalent), connect the

right and left (Channels 1 through 4, A and B) RF OUTPUT ports on the

UA845 to the corresponding left and right antenna inputs on each

receiver. Use the CASCADE ports to connect a fifth receiver.

2. Using the supplied power cable, connect the UA845 to a power outlet.

3. To daisy-chain UR4 Receivers together with Power OUTPUT cables, con-

nect the Power OUTPUT connector of the UA845 to the Power INPUT

connector of one receiver. Connect the remaining receivers similarly.

Connect the POWER INPUT of the unit to a power supply.

NOTE: No more than five (5) Shure UHF receivers should be powered

through a daisy-chain from a single UA845.

4. To power Shure UC4 receivers, connect the power input ports of the UC4

receivers to the 12 Vdc OUT of the UA845. Up to four UC4 Receivers

can be powered.

ANT A IN ANT A INANT B IN ANT B IN

ANT B IN ANT A IN

TO POWER SUPPLY

ANT B IN ANT A IN

ANT A OUTS

12 VDC POWER CONNECTOR

ANT B OUTS

12 VDC POWER CONNECTOR

AC PWR OUTPUT

AC PWR INPUT

CASCADE B CASCADE A

AC PWR OUTPUT

AC PWR INPUT

12 VDC PWR INPUT

UC4 RECEIVER UC4 RECEIVER

UR4 RECEIVER

UA845

SINGLE UA845 SETUP

FIGURE 8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Shure UA845 User's Guide Page 11