Shure J4 User Manual download pdf (Page 17)

Gain for Receivers

• Mic/line level

– Shure “mic/line” switch in the rear

– Sony “level” switch –20 on the front

• Output gain knob all the way clockwise

• The set the “mixing” switch on Sony

receivers to OFF

• Use XLR connectors when ever possible

Most receivers will produce a line level signal. The mic level on the receivers is

often a pad. Use line level whenever possible so the signal goes through the least

possible number of gain stages.

On the Shure, set the “mic/line” switch in the back of the receiver to line level; set

the output gain knob on the front right of the receiver fully clockwise.

On the Sony, set the level switch on the front panel to –20 and the level knob to

MAX, fully clockwise.

In the rear panel of the Sony, watch out for the “mixing” switch near XLR

connector. Be sure this is switched to OFF.

Use the XLR connectors when ever possible.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 50 51

No comments

Shure J4 User Manual Page 17