Shure MX692 User Manual download pdf (Page 7)

English – 6

ADJUSTING THE TRANSMITTER GAIN LEVEL

If transmitter gain

is set correctly, the

audio LED meter on

the UC4 receiver

should reach amber

during normal speech

and momentarily flash red during the loudest

speech. If transmitter output needs to be in-

creased or decreased, adjust the output gain

control.

Set the input attenuation control switch to 9

dB for normal use (default) or -20 dB for loud

voices (this is rare).

CHANGING THE TRANSMITTER GROUP/CHANNEL SETTINGS

For a wireless transmitter such as the MX692

to communicate with a receiver, the transmitter

and receiver must be communicating on the

same frequency. The frequency is set by chang-

ing the transmitter and receiver “group” and

“channel” settings. For a MX692 transmitter to

communicate with a UC4 receiver, the two must

have matching group and channel settings.

See the Shure website for recommended

group and channel settings for your area.

To change MX692 group and channel set-

tings:

1. Turn the transmitter off.

2. Using the supplied

screwdriver, rotate the

GROUP dial (see

page 4) until the desired

setting is reached. Then

rotate the CHANNEL dial until the desired

setting is reached.

0

-20 dB

A

B

C

D

E

F

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments